[PaperSurvey.io](https://www.papersurvey.io) supports a small subset of [markdown](https://en.wikipedia.org/wiki/Markdown) syntax for adjusting text formatting as well as some papersurvey.io specific commands. These may be beneficial for emphasizing certain words in the survey or changing the layout. ## Text formatting ### Color To change color you just need to use `[color=color_code]text[/color]` shortcode. `color_code` is a HEX color code. You may use this color picker to find a color you want to use. You may also use `[color=primary]` and `[color=secondary]`, which will be "Heading/Divider color" and "Secondary color" accordingly configured in your survey settings.

EXAMPLE


        [color=ffbc06]Text in yellow[/color]

        [color=3AE50C]Text in green[/color]

        [color=FF0C00]Text in red[/color]

RESULT


        Text in yellow

        Text in green

        Text in red

### Highlight background To change background color you just need to use `[highlight=color_code]text[/highlight]` shortcode. `color_code` is a HEX color code. You may use this color picker to find a color you want to use. You may also use `[highlight=primary]` and `[highlight=secondary]`, which will be "Heading/Divider color" and "Secondary color" accordingly configured in your survey settings.

EXAMPLE


        [highlight=ffbc06][color=black]Background in yellow, text in black[/color][/highlight]

        [highlight=3AE50C][color=white]Background in black, text in white[/color][/highlight]

        [highlight=FF0C00][color=yellow]Background in red, text in yellow[/color][/highlight]

RESULT


        Background in yellow, text in black

        Background in black, text in white

        Background in red, text in yellow

### Bold To make the text bolder you may wrap the text in two **asterisks**.

EXAMPLE


        Bold text with **asterisks**.

RESULT


        Bold text with asterisks.

### Italics To make the text written in italics you may wrap the text in one *asterisk* or _underscore_:

EXAMPLE


            italicize text with *asterisks* or _underscores_.

RESULT


            italicize text with asterisks or underscores

### Strikethrough To add strike-through you may wrap the text in two ~~tildes.~~

EXAMPLE


            Strikethrough text with ~~tildes.~~.

RESULT


            Strikethrough text with tildes.

### Underline To add the underline below the text, use two __underscores__.

EXAMPLE


            Underline text with two __underscores__.

RESULT


            Underline text with two underscores.

### Unformatted text In some cases you may want to unbold or remove italics from a block of text, you may do with a [unformatted] tag.

EXAMPLE


            **We see bolded text here but [unformatted]here[/unformatted] it isn't**

RESULT


            Bolded text here but here it isn't

## Font sizes If you would like to change the font size in your text, you may use following short codes:

EXAMPLE


            [tiny]Text[/tiny]

            [small]Text[/small]

            [s]Text[/s]

            [normal]Text[/normal]

            [large]Text[/large]

            [larger]Text[/larger]

            [xl]Text[/xl]

            [xxl]Text[/xxl]

RESULT


            Text
            Text
            Text
            Text
            Text
            Text
            Text
            Text

## Text rotation In some cases you would want to rotate the text to fit. You may use the following command to achieve it.

EXAMPLE


            [rotate=90]Text[/rotate]

            [rotate=60]Text[/rotate]

            [rotate=-90]Text[/rotate]

            [rotate=180]Text[/rotate]

RESULT


            Text
            Text
            Text
            Text

## Lists To display text as a list, just start the line with an asterisk. Currently, only one-level ordered and unordered lists are supported. ##### Lists only work in _Description_ type questions! ### Unordered

EXAMPLE


            * One 

            * Two  

            * Three 

            *this is not in list*

RESULT


            
                One
                Two
                Three
            
            this is not in list

### Ordered

EXAMPLE


            1. One 

            2. Two 

            3. Three 

            1 this is not in list

RESULT


            
                One
                Two
                Three
            
            this is not in list

## Spacings and alignment ### Centered text You may align text to the center by using `[center]my text[/center]` tags.

EXAMPLE


            [center]my centered text[/center] 

            [center]next centered line[/center]

RESULT


            my centered text
            next line

Please note that `[center]` tag may need to be placed on each line if you have line breaks. ### Horizontal & Vertical spacing You can use `[verticalspace=0.5]` and `[horizontalspace=0.5]` short codes to adjust the spacings. `0.5` is the length in centimeters (cm) which you can adjust. The length may also be negative if you would like to reduce the spacings instead. Please do not make space between the question name and text box very small - this could impact the recognition as question name could be recognized as text/number as well. Also, `[smallspace]`, `[space]`, `[midspace]`, `[bigspace]` will add **0.1cm**, **0.5cm**, **1.5cm** and **3cm** horizontal spacing accordingly. You can also use shorter versions `[vspace=0.5]` and `[hspace=0.5]`

EXAMPLE


            My text [space] with [horizontalspace=2.5] is here.

RESULT


            My text       with                     is here.

**Note:** `[smallspace]`, `[space]`, `[midspace]`, `[bigspace]` will be hidden in web surveys. Where `[verticalspace=0.5]`, `[horizontalspace=0.5]`, `[vspace=0.5]` and `[hspace=0.5]` short codes functions the same as in paper surveys. ### Align text to right If you would like to align text to the right, just use `[fill]` tag before the start of the text.

EXAMPLE


            My left-aligned text [fill] My right-aligned text.

RESULT


            My left-aligned text My right-aligned text.

### Fixed width or height box For more advanced layouts you may set the height and width of the text block allowing to align text areas using `[width=3cm]3 cm (1.18in) width[/width]` or `[height=3cm]3 cm (1.18in) height[/height]` or both `[height=3cm][width=3cm]3 cm (1.18in) box[/width][/height]`. `[height]` should always be used with the Prefill Forms dynamic variables to prevent dynamically added text from changing the survey layout. `[width]` shortcode is particularly useful when aligning text with "Inline text" and "Inline checkboxes".

EXAMPLE [width=3cm]3 cm (1.18in) width[/width] [width=3cm]3 cm (1.18in) width[/width] [width=3cm]3 cm (1.18in) width[/width] [width=5cm][center]centered 5cm[/center][/width] [width=5cm][center]centered 5cm[/center][/width]


            [height=3cm][width=3cm][center]3cm x 3cm[/center][/height][height=3cm][width=3cm][center]3cm x 3cm[/center][/height]


            [height=3cm][width=3cm][center]3cm x 3cm[/center][/height][height=3cm][width=3cm][center]3cm x 3cm[/center][/height]

RESULT


            3 cm (1.18in) width 3 cm (1.18in) width 3 cm (1.18in) width


            centered 5cm centered 5cm


            3cm x 3cm
            3cm x 3cm

            3cm x 3cm
            3cm x 3cm

### Page break To move section down to the next page you could use `[pagebreak]` shortcode. This shortcode may not work in 'Heading' type questions. Alternatively, you may add a new question and select its type as "Page break".

EXAMPLE


            My first page 
            [pagebreak] 
            This text will appear in the next page

RESULT


            My first page 
            

            

            

            

            This text will appear in the next page

### Line break To make a small line break may just press the **[Enter] button** in your keyboard to add as many line breaks as you need. You may also use `[br]` or `[newline]` short codes in your text to add a line break.

EXAMPLE


            My first paragraph [br] Another paragraph

RESULT


            My first paragraph
            

            Another paragraph

### Large Line break If you wish to make a large line break you may insert `[linebreak]` tag in your text.

EXAMPLE


            My first paragraph
            [linebreak]
            Another paragraph

RESULT


            My paragraph
            

            

            

            Another paragraph

### Horizontal line If you would like to add a horizontal line, just use `[hr]` in your text

EXAMPLE


            My first paragraph
            [hr]
            Another paragraph

RESULT


            My paragraph
             
            Another paragraph

### Line If you would like to add a line, just type six underscores `______` in your text. Line will be extended to automatically fit in paragraph.

EXAMPLE


            ______

RESULT

### Dotted line If you would like to add a dotted line, just type six dots `......` in your text. Line will be extended to automatically fit in paragraph.

EXAMPLE


            ......

RESULT

### Pagination There are several shortcodes for displaying page numbers. `[currentpage]` - shows current page number. `[lastpage]` - shows the last page. For example, you may use the above shortcodes to get a dynamically changing text of "This is a page 1 of 5" ("This is a page [currentpage] of [lastpage]). Additionally, if you only want to display certain text on a specific page only, you may use this shortcode: `[page=PAGE]My text[/page]`. Replace `PAGE` with the page number you want the 'My text' to de displayed. ### Other short-codes Fixed paragraph height: `[height=3cm]my paragraph has max height of 3cm[/height]`. **NOTE**: This is extremely useful with Prefill Forms to prevent dynamically added text to change the survey layout. Fixed paragraph width: `[width=3cm]my paragraph has max width of 3cm[/width]`. **NOTE**: This command is particularly useful when aligning text with "Inline text" and "Inline checkboxes". This is a list of other short-codes that are available to use. Unique identifier: `[id]` Link to web survey: `[link]` QR code to web survey: `[websurvey_qrcode height=2cm]`. **IMPORTANT**: DO NOT place this code at the top-left and bottom-right of the survey. Smiles: `[sad]`, `[neutral]`, `[smile]` Checked checkbox: `[check]`, `[multicheck]`, `[singlecheck]` Filled checkbox: `[filled]`, `[multifilled]`, `[singlefilled]` Corrected checkbox: `[correct]` Math equations: `[equation]100+999[/equation]` `[equation]100-10[/equation]` For multilingual surveys, if a letter is displayed as a square box, it means the font in use doesn't contain the glyph for that character. In these cases you could use `[latin]` and `[arabic]` shortcodes. Arabic typesetting (Allows using Arabic script, where the primary language is e.g., English): `Sentence in English language [arabic]استطلاع رأي[/arabic]` Latin typesetting (Allows using Latin script when the primary language is e.g., Arabic): `[latin]Sentence in English language[/latin]استطلاع رأي` ## Images You may upload your images to be included in the paper survey. This feature is only available in the __Enterprise__ plan. However, you may try it out in your demo survey, by inserting the image of our logo: ```[img]logo[/img]```

If you would like to center the image, additionally provide center parameter, (e.g. [img width=5 height=3 center]logo[/img])
If you would like to include a full-width image, do not provide any parameters, (e.g. [img]logo[/img])
If you would like to set image to half page width, set width parameter to half (e.g. [img width=half]logo[/img])
If you would like to set image to third page width, set width parameter to third (e.g. [img width=third]logo[/img])

Help Center

Topic: Subscription

Can I pay by Paypal?

Topics

Get Started with PaperSurvey.io Software